Removal and Installation of Valve Oil Seal: Installation

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

Install the valve oil seal using Tool.
Tool number: KV10115600 (J-38958)

Fig 1: Installing Valve Oil Seal Using Tool
Courtesy of NISSAN NORTH AMERICA, INC.
Apply new engine oil on the new valve oil seal joint and seal lip.
Install the valve oil seal to the specified height (H).
Height (H) (without valve spring installed)

Intake and exhaust: 14.300 - 14.900 mm (0.5630 - 0.5870 in)