LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 876 (Engine Mechanical) >> Removal And Installation >> Ignition Coil >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine room cover. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect the harness connector from the ignition coil.
  3. Remove the ignition coil.
    CAUTION: Do not shock ignition coil.
scientia non olet · About LEMON Manuals