Camshaft Sprocket Runout

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Install the camshaft in the cylinder head.
Install the camshaft sprocket to the camshaft.
Measure the camshaft sprocket runout.
Runout: Less than 0.15 mm (0.0059 in)

Fig 1: Measuring Camshaft Sprocket Runout Using Dial Gauge
Courtesy of NISSAN NORTH AMERICA, INC.
- If measurement exceeds the specification, replace the camshaft sprocket.