Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Access to the refrigerant pressure sensor is through the opening in the front bumper fascia.

Discharge the refrigerant. Refer to "HFC-134A (R-134A) SERVICE PROCEDURE ".
Disconnect the harness connector from the refrigerant pressure sensor.
Remove the refrigerant pressure sensor from the condenser.
CAUTION: Be careful not to damage the condenser fins.

Fig 1: Identifying Refrigerant Pressure Sensor And Horns
Courtesy of NISSAN NORTH AMERICA, INC.