LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 874 (Heater & Air Conditioning System) >> Removal And Installation >> High-Pressure Flexible Hose >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine undercover.
  2. Remove the front fender protector (LH). Refer to "REMOVAL AND INSTALLATION ".
  3. Remove the air duct and resonator assembly and air cleaner case. Refer to "REMOVAL AND INSTALLATION ".
  4. Discharge the refrigerant. Refer to "HFC-134A (R-134A) SERVICE PROCEDURE ".
  5. Remove the high-pressure flexible hose.
    CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
scientia non olet · About LEMON Manuals