How To Read Harness Layout
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
The following Harness Layouts use a map style grid to help locate connectors on the drawings:
- Main Harness, Console Sub-harness, Console Switch Sub-harness and Optical Sensor Sub-harness
- Engine Room Harness and Engine Room Sub-harness
- Engine Room Harness (Passenger Compartment)
- Engine Control Harness and Engine Control Sub-harness
- Chassis Harness and Rear Sonar Sensor Sub-harness
- Body Harness, Left Front Seat Harness and Third Row Power Folding Seat Sub-harness
- Body No. 2 Harness and Right Front Seat Harness
- Room Lamp Harness, Room Lamp Sub-harness A and Room Lamp Sub-harness B
- Back Door Harness, Back Door No. 2 Harness, Back Door RH Harness, Back Door LH Harness and Back Door No. 2 RH Harness
To use the grid reference
- Find the desired connector number on the connector list.
- Find the grid reference.
- On the drawing, find the crossing of the grid reference letter column and number row.
- Find the connector number in the crossing zone.
- Follow the line (if used) to the connector.