Luggage Compartment Door Garnish Outside: Replacement

WARNING: This page is about a different car, the 2004 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

The installation procedures are the removal procedures in reverse order. However, only installation procedures requiring additional information are included.

REMOVE LUGGAGE COMPARTMENT LOCK CYLINDER & KEY SET
1. Remove the 2 nuts and luggage compartment lock cylinder.
REMOVE LUGGAGE COMPARTMENT DOOR GARNISH OUTSIDE
1. Remove the nut.
2. Remove the 4 clips and garnish.
Fig 1: Removing Luggage Compartment Door Garnish Outside
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SYMBOL EMBLEM
1. Using white gasoline, clean the garnish installation surface.
2. Using a heat light, heat the garnish and emblem to 20 to 30°C (68 to 86°F).
  NOTE: Do not heat the garnish and emblem excessively.
3. Install the emblem with the 4 clips.