On-Vehicle Inspection

WARNING: This page is about a different car, the 2004 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

WASHER MOTOR
1. Operation Check
  1. Pour the water into the washer jar with the washer motor and the pump installed to the washer jar assy.
  2. Connect the battery (+) to terminal 2 of the washer motor and the pump, the battery (-) to terminal 1 of the washer motor and the pump. Check that the water comes out from the washer jar.
Fig 1: Checking Washer Motor
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002