LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 510 (Wiper System & Washer System) >> Washer Nozzle >> Adjustment

Washer Nozzle: Adjustment

WARNING: This page is about a different car, the 2004 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT WASHER NOZZLE 
    1. With the engine running, check that the point where the washer fluid hits the windshield and the rear window is within the range indicated by the hatched line.
    Fig 1: Identifying Point Where The Washer Fluid Hits
    G02900386Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002