Inspection Procedure
WARNING: This page is about a different car, the 2004 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- REPLACE CASSETTE TAPE WITH ANOTHER AND RECHECK
- Replace the cassette tape with another and recheck.
- Replace the faulty cassette tape with the normal one to see if the same trouble occurs again.
Standard: malfunction disappear.
- Replace the faulty cassette tape with the normal one to see if the same trouble occurs again.
- OK: CASSETTE TAPE FAULTY
- NG: GO TO NEXT STEP.
- Replace the cassette tape with another and recheck.
- CHECK FOR ANY FOREIGN OBJECT
- Check for foreign object.
- Check that no foreign material and troubles are detected in the radio receiver assembly cassette tape player.
- NG: REMOVE FOREIGN OBJECT
- OK: GO TO NEXT STEP.
- CLEAN HEAD AND CHECK OPERATION
- Head cleaning
- Raise the cassette door with your finger. Next, using a pencil or similar object, push in the guide.
- Using a cleaning pen or cotton applicator soaked in cleaner, clean the head surface, pinch rollers and capstans.
- Check that the same trouble occurs again.
- OK: HEAD DIRTY
- NG: CHECK AND REPLACE RADIO RECEIVER ASSY
- Check for foreign object.