Typical Malfunction Thresholds
WARNING: This page is about a different car, the 2004 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL MALFUNCTION THRESHOLDS
| Detection Criteria | Threshold |
|---|---|
| P0505 Functional check: | |
| Following conditions are met (At idle (after running with more than 6.2 mph (10 km/h) per trip) | Case 1: A and B (5 times) Case2: B (5 seconds) |
| A. Either of the following conditions is met: | 1 or 2 |
| 1. Deviation of engine speed (When shift position N or A/C ON) | Less than - 100 rpm or more than 200 rpm |
| 2. Deviation of engine speed (When shift position D or A/C OFF) | Less than - 100 rpm or more than 150 rpm |
| B. Either of the following condition is met: | 1 or 2 |
| 1. IAC flow rate learning value (A/C OFF) | 0.5 L/sec or less or 2.75 L/sec or more |
| 2. IAC flow rate learning value (A/C ON) | 0.22 L/sec or less or 0.98 L/sec or more |
| P0505 Range check: | |
| Number of missing output voltage change | 2,000 times or more |
| P0511: | |
| Number of missing output voltage change | 1,000 times or more |