Typical Enabling Condition
WARNING: This page is about a different car, the 2004 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS
| Item | Specification | |
|---|---|---|
| Minimum | Maximum | |
| The monitor will run whenever the following DTCs are not present | See LIST OF DISABLE A MONITOR | |
| Throttle valve position | Closed angle position | |
| "Stop and Go" | 4 times | - |
"Stop and go" is defined as follows:
"Stop" indicates a vehicle speed of 0 mph (0 km/h). "Go" indicates a vehicle speed of 18.6 mph (30 km/h).