LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 463 (Engine Control System (SFI) - Diagnostics) >> DTC P0011: Camshaft Position "A" -Timing Over-Advanced Or System Performance (Bank 1); DTC P0012: Camshaft Position "A" -Timing Over-Retarded (Bank 1) >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2004 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL MALFUNCTION THRESHOLDS

Detection Criteria Threshold
Duration time of the following conditions (a) and (b) are met: 4.5 seconds or more
  1. Following conditions are met:
1 and 2
  1. VVT control status
Feedback
  1. #2. Deviation of valve timing (Difference between targeted and actual valve timing)
More than 5°CA
  1. #(b) Following conditions is met:
Response of valve timing 1 sec/°CA or more