LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 463 (Engine Control System (SFI) - Diagnostics) >> DTC P0010: Camshaft Position "A" Actuator Circuit (Bank 1) >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2004 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL MALFUNCTION THRESHOLDS

Detection Criteria Threshold
One of the following condition is met: (a) or (b)
(a) Output signal duty for OCV Output duty ratio is 100 % (always ON) despite the target duty ratio is less than 70 %/
(b) Output signal duty for OCV Output duty is 3 % or less despite the ECM supplying the current to the OCV