LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2003 >> Matrix Base, FWD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Brake Rotor >> Removal & Installation

Removal & Installation

  1. Remove caliper assembly with brakeline connected, and wire aside. See REAR BRAKE CALIPER . Remove torque plate from backing plate.
  2. Mark rotor and hub for installation reference. Slide rotor off hub assembly. To remove rotor, turn parking brake shoe adjuster to release shoes from rotor (if necessary). To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals