LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2003 >> Matrix Base, FWD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Booster >> Removal

Brake Booster: Removal

  1. Remove air cleaner assembly.
  2. Remove master cylinder. See MASTER CYLINDER . Disconnect vacuum hose from brake booster.
  3. Remove 2 nuts and cruise actuator and control ECU. See Figure. Disconnect brakeline from flexible hose. Remove front left brakeline with grommet from body. Remove No. 1 panel and finish panel.
  4. Remove pedal spring, clip, clevis pin, 4 nuts and clevis. Remove brake booster and gasket.
scientia non olet · About LEMON Manuals