LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2003 >> Matrix Base, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Front Brake Rotor >> Removal & Installation

Removal & Installation

  1. Remove caliper assembly with brakeline connected, and wire aside. See FRONT BRAKE CALIPER . Remove torque plate from knuckle.
  2. Mark rotor and hub for installation reference. Slide rotor off hub assembly. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals