Typical Enabling Conditions
WARNING: This page is about a different car, the 2005 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever this DTC is not present. | See LIST OF DISABLE A MONITOR |
| Shift change | Shift change is completed and before starting next shift change operation |
| ECM selected gear | 4th or 5th |
| Output shaft rpm | 1,000 rpm or more |
| NSW switch | OFF |
| R switch | OFF |
| L switch | OFF |
| Engine | Running |
| Ignition switch | ON |
| Starter | OFF |