Brake Booster: Removal
WARNING: This page is about a different car, the 2004 Toyota Corolla and 2003 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- Remove left front wheel.
- Remove master cylinder. See MASTER CYLINDER . Disconnect vacuum hose from brake booster.
- Remove 2 nuts and cruise actuator and control ECU. See Fig 1. Disconnect brakeline from flexible hose. Remove front left brakeline with grommet from body. Remove No. 1 panel and finish panel.
- Remove pedal spring, clip, clevis pin, 4 nuts and clevis. Remove brake booster and gasket.