LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2003 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Rear Wheel Cylinder >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Toyota Tundra and 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

With brake drum and shoes removed, disconnect hydraulic line from wheel cylinder. Remove 2 mounting bolts and remove wheel cylinder. To install, reverse removal procedure. Adjust brakes and bleed system. See BLEEDING BRAKE SYSTEM .

scientia non olet · About LEMON Manuals