LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2003 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Load-Sensing Proportioning Valve (LSPV) & By-Pass Valve (BV) >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Toyota Tundra and 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support vehicle. For procedure, see Fig 1 and Fig 2 . For component view, see Figure. For brake system bleeding procedure, see BLEEDING BRAKE SYSTEM . For adjusting procedure, see LOAD-SENSING PROPORTIONING VALVE (LSPV) & BY-PASS VALVE (BV)  in ADJUSTMENTS.

Fig 1: LSP & By-Pass Valve Assembly Removal & Installation Procedure (1 Of 2)
G00301583Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: LSP & By-Pass Valve Assembly Removal & Installation Procedure (2 Of 2)
G00301584Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002