Description & Operation

WARNING: This page is about a different car, the 2003 Toyota Tundra and 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: For warnings and procedures regarding vehicles equipped with Anti-Lock Brake Systems (ABS), see appropriate ANTI-LOCK article.

Hydraulic brake system uses a tandem master cylinder with a vacuum power assist servo. Tundra is equipped with front disc brakes and rear drum brakes standard.

A Load-Sensing Proportioning Valve and By-Pass Valve (LSPV & BV) are used to regulate brake pressure between front and rear brakes. Rear brakes on all models are self-adjusting.

Parking brake lever or pedal mechanically activates rear brakes. A cable applies rear shoes.