Step 2 - Problem No. 2 (Clock Loses Or Gains Time)
- Check that the battery positive voltage is 10 - 16 V.
If voltage is not as specified, replace the battery.
- Inspect the error of the clock.
Allowable error (per day): +/- 1.5 seconds
If the error exceeds the allowable error, replace the clock.
- Check that the clock adjusting button is sticking in position and has failed to return.
If the error exceeds the allowable error, replace the clock.
- Troubleshoot the clock following Fig 2.
NOTE:
Inspect the connector on the wire harness side.