LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2002 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Front Brake Rotor >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Toyota Prius and 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove caliper assembly with brakeline connected, and wire aside. See FRONT BRAKE CALIPER . Remove torque plate from knuckle.
  2. Mark rotor and hub for installation reference. Slide rotor off hub assembly. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals