LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2002 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (Disc Brakes & Drum Brakes) >> Adjustments >> Parking Brake (Lever Or Pedal) >> Lever Stroke Adjustment

Lever Stroke Adjustment

WARNING: This page is about a different car, the 2003 Toyota Tundra and 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. To check parking brake adjustment, depress parking brake pedal with specified force. Count number of notches (clicks) until parking brake is fully applied. See PARKING BRAKE LEVER STROKE SPECIFICATIONS  table. Adjust parking brake if travel is not within specification.
    PARKING BRAKE LEVER STROKE SPECIFICATIONS

    Application Notches Force Applied Lbs. (Kg)
    Tundra 6-14 44 (20)
  2. Tighten one of the adjusting nuts of the intermediate lever. Loosen other nut until travel is correct. Tighten 2 adjusting nuts. Confirm that bell crank stopper screw comes into contact with backing plate.
  3. Loosen adjusting nut until lever travel is correct. Tighten lock nut.
scientia non olet · About LEMON Manuals