LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2002 >> Echo L4-1.5L (1NZ-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair

Camshaft Position Sensor: Service and Repair

Camshaft Position Sensor:






REMOVAL

REMOVE CAMSHAFT POSITION SENSOR




a. Disconnect the connector.

b. Remove the bolt and camshaft position sensor.

Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)

INSTALLATION
Installation is in the reverse order of removal.
scientia non olet · About LEMON Manuals