Key Reminder

SYSTEM OUTLINE
Current is always applied from the DOME fuse to TERMINAL (B) 1 of the combination meter. When the ignition SW is turned to ON position, the current from the GAUGE fuse flows to TERMINAL (B) 2 of the combination meter

KEY REMINDER SYSTEM
When the driver door is opened with the ignition SW off and ignition key remaining in the key cylinder (Unlock warning SW on), a signal is input from the unlock warning SW to TERMINAL (B) 21 of the combination meter, and from the door courtesy SW front LH to TERMINAL (B) 12 of the combination meter. As a result, the buzzer in the combination meter goes on and warns the driver that the key is remaining in the key cylinder.