LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2002 >> Corolla S, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Automatic Transmission Diagnosis - U340E & U341E) >> Self-Diagnostic System >> Malfunction Indicator Light Inspection

Malfunction Indicator Light Inspection

WARNING: This page is about a different car, the 2002 Toyota ECHO, 2002 Toyota Celica, 2001 Toyota ECHO, and 2001 Toyota Celica. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The CHECK engine light located on instrument cluster is also known as Malfunction Indicator Light (MIL). Inspect MIL to ensure it is operational and will come on if a DTC is set.
  1. Turn ignition on with engine off. MIL should come on and remain on. If MIL does not come on, check bulb circuit on instrument cluster and wiring circuit between MIL and ECM. See WIRING DIAGRAMS .
  2. Start engine and ensure MIL goes off. If MIL remains on with engine running, a malfunction is detected. See RETRIEVING DIAGNOSTIC TROUBLE CODES .