Connector Identification

Fig 1: Identifying A/T Oil Temperature Sensor Connector Terminals (Sequoia)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Identifying A/T Oil Temperature Sensor Connector Terminals (Except Sequoia)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Identifying Cruise Control ECU Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 4: Identifying Transmission Solenoid 3-Pin Connector Terminals (Tacoma & Tundra)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 5: Identifying Transmission Solenoid 8-Pin Connector Terminals (Sequoia Tundra & 4Runner)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 6: Identifying Engine Coolant Connector Terminal (4.7L)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 7: Identifying Engine Coolant Temperature Sensor Connector Terminals (Except 4.7L)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 8: Identifying O/D ECU Connector Terminals (Tacoma)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 9: Identifying O/D Main Switch Connector Terminals (Sequoia & Tundra)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 10: Identifying O/D Solenoid Connector Terminals (Tacoma Only)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 11: Identifying Park/Neutral Position Switch Connector Terminals (Except Tundra)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 12: Identifying PNP Switch Connector Terminals (Tundra)

Fig 13: Identifying Pattern Select Switch Connector Terminals (Tacoma)

Fig 14: Identifying Stop Light Switch Connector Terminals

Fig 15: Identifying Transmission Control Relay (Tacoma)

Fig 16: Identifying VSS Connector Terminals

Fig 17: Identifying No. 1 Vehicle VSS Speed Sensor (Combination Meter) Connector Terminals (Tacoma)