LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2002 >> 4Runner Limited, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case (Diagnosis) (VF3AM)) >> Description & Operation >> Touch Select 2-4 Switch

Touch Select 2-4 Switch

WARNING: This page is about a different variant/trim than selected.

Touch select 2-4 switch sends a request signal to the 4WD control ECU, which activates the corresponding actuator(s). On Sequoia, this switch is part of the integration and control panel, located in the front of the floor console. On 4Runner, this switch is located on transfer shift lever knob.

scientia non olet · About LEMON Manuals