LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2002 >> 4Runner Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes And Drum Brakes >> Front Speed Sensor >> Removal >> Remove Speed Sensor

Remove Speed Sensor

  1. Disconnect the speed sensor connector.
  2. Remove the 4 resin clips and 3 clamp bolts holding the sensor harness from the steering knuckle, upper arm and side rail.
    1. Torque: 
      1. Steering knuckle and upper arm: 8.0 N.m (82 kgf.cm, 71 in.lbf) 
      2. Side rail: 12 N.m (122 kgf.cm, 9 ft.lbf) 
  3. Remove the speed sensor installation bolt from the steering knuckle.
    1. Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf) 
    Fig 1: Locating Speed Sensor Installation Bolt
    G01025502Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals