LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Tundra Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Removal & Installation >> Instrument Cluster >> Removal & Installation (Sequoia)

Removal & Installation (Sequoia)

  1. Disable air bag system, remove driver's air bag and steering wheel. See AIR BAG RESTRAINT SYSTEMS article. Remove steering column covers. Lower or remove steering column as necessary to obtain clearance for instrument cluster removal.
  2. Remove hood release and fuel door levers. Remove screws from instrument panel lower finish panel and remove panel. Using screwdriver, lift up switch base and remove. Remove No. 2 heater-to-register duct. Remove instrument cluster finish panel.
  3. Remove retaining screws from instrument cluster. Pull cluster outward enough to disconnect wiring harness connectors. Remove instrument cluster. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals