LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 225 (Disc Brakes & Drum Brakes) >> Testing >> Proportioning Valve

Proportioning Valve

WARNING: This page is about a different car, the 2003 Toyota RAV4 and 2002 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

Attach and bleed pressure gauge set. Raise master cylinder pressure and check rear wheel pressure. See PROPORTIONING VALVE PRESSURE SPECIFICATIONS  table. When inspecting fluid pressure, check left front and right rear together, then check right front and left rear together. If rear cylinder pressure is incorrect, replace ABS actuator. See appropriate ANTI-LOCK article in BRAKES. Remove pressure gauge set. Bleed brake system and check for leaks.

PROPORTIONING VALVE PRESSURE SPECIFICATIONS

Application Master Cylinder Pressure - psi (kg/cm2) Rear Wheel Cylinder Pressure - psi (kg/cm2)
Low Pressure Reading 497 (35) 497 (2-35)
High Pressure Reading 1138 (80) 749 (52)