LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P0335: Crankshaft Position (CKP) Sensor "A" Circuit Malfunction Or DTC P0339: Crankshaft Position Sensor "A" Circuit Intermittent >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.

The Crankshaft Position (CKP) sensor consists of a pick-up coil and signal plate. CKP sensor is located on oil pump body. Signal plate has 34-teeth and is mounted on timing belt guide. DTC P0335 is set if no signal is received by ECM from CKP sensor while cranking. DTC P0335 is also set if no signal is received by ECM from CKP sensor with engine speed of 450 RPM of more. DTC P0339 is set if no signal is received by ECM from CKP sensor with engine speed of 1000 RPM or more. Possible causes are:

scientia non olet · About LEMON Manuals