LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P0010: Camshaft Position "A" Actuator Circuit (Bank 1) Or DTC P0020: Camshaft Position "A" Actuator Circuit (Bank 2) >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.

The VVT system controls the intake valve timing properly in response to driving condition. The ECM controls the Oil Control Valve (OCV) to make the intake valve timing properly, and oil pressure controlled with OCV is supplied to the VVT controller, and then VVT controller changes relative position between the camshaft and the crankshaft. See Fig 1. Possible causes are:

Fig 1: Identifying Camshaft Position Actuator Circuits
G00165092Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002