Diagnostic Aids
If DTC P0351 is displayed, check No.1 ignition coil with igniter circuit. If DTC P0352 is displayed, check No.2 ignition coil with igniter circuit. If DTC P0353 is displayed, check No. 3 ignition coil with igniter circuit. If DTC P0354 is displayed, check No.4 ignition coil with igniter circuit. If DTC P0355 is displayed, check No. 5 ignition coil with igniter circuit. If DTC P0356 is displayed, check No. 6 ignition coil with igniter circuit. If DTCs P0351 , P0352, P0353, P0354, P0355 and P0356, are output simultaneously, IGF circuit may be open or short. Read freeze frame data using OBD-II scan tool or hand-held tester, because freeze frame records engine conditions when the malfunction is detected. When troubleshooting, it is useful to determine whether the vehicle was running or stopped, the engine was warmed up or not, the air-fuel ratio was lean or rich, etc. at the time of the malfunction.