DTC P0171, DTC P0172, DTC P0174, DTC P0175: Notes

WARNING: This page is about a different car, the 2003 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.

Code Definition

DTC P0171: System Too Lean (Bank No. 1)
DTC P0172: System Too Rich (Bank No. 1)
DTC P0174: System Too Lean (Bank No. 2)
DTC P0175: System Too Rich (Bank No. 2)

NOTE: Bank No. 1 refers to bank that includes cylinder No. 1. Bank No. 2 refers to bank without cylinder No. 1. Sensor No. 1 refers to sensor closest to engine block.

CAUTION: If ECM replacement is instructed in following testing, always ensure ECM harness connector and ground circuit are okay. If either are suspect, repair and repeat testing to confirm ECM malfunction. If ECM is replaced, ECM must be programmed with proper ignition key code for engine immobilizer system. For programming procedures, see COMPUTER RELEARN PROCEDURES - LEXUS article in GENERAL INFORMATION.