Removal & Installation
WARNING: This page is about a different car, the 2002 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM. Remove front and rear door scuff plates. Remove center pillar lower garnish. Disconnect seat belt pretensioner connector and retractor switch connectors. Remove 2 bolts, floor anchor and pretensioner assembly.
- To install, reverse removal procedure. Tighten seat belt pretensioner bolts to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See ACTIVATING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM.