LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Air Bag Restraint Systems) >> Disposal Procedures >> Off-Vehicle Deployment >> Seat Belt Pretensioner

Seat Belt Pretensioner

WARNING: This page is about a different car, the 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Remove appropriate seat belt pretensioner. See SEAT BELT PRETENSIONER  under REMOVAL & INSTALLATION. Cut seat belt near retractor.
  2. Connect Deployment Tools (09082-00700 and 09082-00770) to seat belt pretensioner connector. Position seat belt pretensioner on ground an cover with wheel and tire assembly. See Fig 1. Position deployment tool at least 33 feet (10 m) away from seat belt pretensioner. Connect deployment tool Red clip to positive battery terminal and Black clip to negative battery terminal. Press activation switch to deploy seat belt pretensioner. Because of heat, wait 30 minutes before handling.
Fig 1: Deploying Seat Belt Pretensioner
G98C08196Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals