LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Axle Shafts - Front & Rear) >> Axle Shaft Length Specifications

Axle Shaft Length Specifications

WARNING: This page is about a different car, the 2001 Toyota Sequoia, 2001 Toyota RAV4, 2001 Toyota MR2, and 2001 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
FRONT AXLE SHAFT LENGTH SPECIFICATIONS

Application In. (mm)
Highlander
1MZ-FE(FF) FWD
Left Side 23.20-23.36 (589.2-593.2)
Right Side 34.96-35.12 (888.0-892.0)
1MZ-FE(FF) 4WD
Left Side (1)
Right Side (1)
RAV4
FWD (2)
Left Side 22.85-23.24 (580.4-590.4)
Right Side 33.60-33.99 (833.5-863.5)
AWD (2)
Left Side 20.30-20.69 (515.5-525.5)
Right Side 36.04-36.43 (915.5-925.5)
Sequoia (3)
FWD & AWD
Left Side 20.53-20.69 (521.5-525.5)
Right Side 20.53-20.69 (521.5-525.5)
(1) Axle length specification not available from manufacturer at time of publication.
(2) Measure axle shaft length between inner joint flange and outer joint flange. See Figure.
(3) Measure axle shaft length between inner joint flange and outer joint flange. See Figure
REAR AXLE SHAFT LENGTH SPECIFICATIONS

Application In. (mm)
Highlander
Left Side 23.73-24.13 (602.7-612.7)
Right Side 23.73-24.13 (602.7-612.7)
MR2 (1)
Left Side 22.26-22.65 (565.4-575.4)
Right Side 31.85-32.25 (809.1-819.1)
RAV4 (2)
Left Side 22.04-22.43 (559.9-569.9)
Right Side 23.9-24.29 (606.9-616.9)
(1) Measure axle shaft length between inner joint flange and outer joint flange. See Figure.
(2) Measure axle shaft length between inner joint flange and outer joint flange. See Figure.
scientia non olet · About LEMON Manuals