LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Air Bag Restraint Systems) >> Removal & Installation >> Side Air Bag Module >> Removal

Side Air Bag Module: Removal

WARNING: This page is about a different car, the 2002 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Turn ignition switch to LOCK position. Disconnect and shield negative battery cable. Wait at least 90 seconds. Remove 2 seat track covers and 4 bolts. Disconnect electrical connectors and remove seat.
  2. On models with manual seats, remove reclining adjuster release handle and adjuster knob. See Figure. On models with power seats, remove power seat switches. On all models, remove cup holder, front seat cushion shields and front seat cushion. Remove assist grip and armrest. Remove 4 bolts and seat back assembly and pad.
  3. Fold seat back cover up and remove hook from seat back frame. Remove seat back frame from seat back cover with pad. Remove 2 nuts and remove side air bag module.
scientia non olet · About LEMON Manuals