For Diagnostics
WARNING: This page is about a different car, the 2002 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch to LOCK position. Disconnect and shield negative battery cable. Wait at least 90 seconds. Install driver-side air bag module. Reconnect passenger-side air bag module connector. Connect air bag sensor assembly connector.
- Connect right and left front air bag sensor connectors. Connect right and left seat belt pretensioner connectors. Connect right and left-side air bag module connectors. Connect right and left-side air bag sensor connectors. Reconnect negative battery cable. Perform SYSTEM OPERATION CHECK .