Side Air Bag Module: Removal

WARNING: This page is about a different car, the 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable Toyota Hybrid System (THS) if necessary. See DISABLING & ACTIVATING TOYOTA HYBRID SYSTEM (THS) . Turn ignition switch to LOCK position. Disconnect and shield negative battery cable. Wait at least 90 seconds. Remove 2 seat track covers and 4 bolts. See Figure. Disconnect side air bag module connector and remove seat.
Remove screws and front seat cushion shield and reclining adjuster release handle. Disconnect wire harness and remove front seat cushion assembly. Remove 4 bolts and seat back assembly. Remove hog rings from bottom of seat back. Fold seat back cover up and remove hook from seat back frame. Remove 2 nuts and remove side air bag module.