LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Differentials & Axle Shafts - Rear) >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2001 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Axle Shaft Flange-To-Side Gear Shaft Nut 41 (56)
Bearing Cap Bolt 58 (79)
Center Support Bearing Bolts 27 (37)
Differential Assembly Mounting Bolt
Front Mount-To-Carrier Bolt 86 (117)
Rear Mount-To-Carrier Bolt 101 (137)
Rear Mount-To-Frame Bolt 48 (65)
Differential Carrier Cover Bolt 35 (47)
Drain & Filler Plugs 36 (49)
Drive Pinion Nut (1) 80-174 (108-235)
Drive Shaft Companion Flange Bolt/Nut 54 (73)
Hub Nut 159 (216)
Ring Gear Bolt 71 (96)
Stabilizer Bar Link Bolt/Nut 32 (44)
(1) Tighten to 174 ft. lbs. (236 N.m) when setting drive pinion preload.