Axle Assembly Specifications
WARNING: This page is about a different car, the 2001 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
AXLE ASSEMBLY SPECIFICATIONS
| Application | Specification | |||
|---|---|---|---|---|
| Drive Pinion Rotating Torque | ||||
| New Bearings | 9.7-14.2 INCH lbs. (1.1-1.7 N.m) | |||
| Used Bearings | 5.3-7.9 INCH lbs. (.6-.9 N.m) | |||
| Ring Gear Backlash | .0051-.0071" (.129-.180 mm) | |||
| Ring Gear Runout | .0028" (.071 mm) | |||
| Side Gear Backlash | .0020-.0079" (.050-.201 mm) | |||
| Total Assembled Preload (1) | 2.6-4.3 INCH lbs. (.3-.5 N.m) | |||
|
||||