LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Diagnosis - U150E) >> Performance Tests >> Road Test >> "2" Position

"2" Position

WARNING: This page is about a different car, the 2002 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place selector lever in "2" position. Drive vehicle with accelerator pedal held constantly at full throttle. Ensure 1-2 upshift points take place and are operating properly.
    NOTE: In "2" position, there will be no lock-up to 2nd gear.
  2. While driving in "2" position, release accelerator pedal and check engine braking effect. If there is no engine braking effect, 2nd brake is defective. Check for abnormal noise and shock at acceleration and deceleration.
scientia non olet · About LEMON Manuals