LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Automatic Transmission Diagnosis - A340E, A340F) >> Removal & Installation >> Park/Neutral Position Switch >> Removal

Park/Neutral Position Switch: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sequoia, 2002 Toyota 4Runner, and 2001 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

Park/neutral position switch is located on side of transmission. Remove lock nut, washer and manual lever from control shaft. See Figure or Figure . Bend up tabs on lock washer. Remove lock nut, lock washer and seal from control shaft. Remove retaining bolts and switch.