Circuit Description
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sequoia, 2002 Toyota 4Runner, and 2001 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
Stop light switch signal is used to detect when brakes have been applied. ECM uses this signal to cancels operation of TCC. DTC is set if stop light switch does not turn off when vehicle is being driven. Possible causes are:
- Short in stop light switch signal circuit.
- Stop light switch.
- ECM.