SLN & SLT Solenoids
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sequoia, 2002 Toyota 4Runner, and 2001 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
Raise and support vehicle. Remove transmission oil pan. Remove appropriate solenoid. See appropriate A-340E OVERHAUL article. To check solenoid operation, connect positive battery voltage to solenoid terminal No. 1. Ensure a 8-10 watt bulb is placed in-line of positive lead. See Figure. Connect negative lead to terminal No. 2 and monitor valve's movement. Replace as needed.