Manual Shift Test
WARNING: This page is about a different car, the 2002 Toyota Land Cruiser, 2002 Lexus LX 470, 2001 Toyota Land Cruiser, and 2001 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform manual shift test if no DTCs exist. Manual shift test determines if problem area is in electrical circuits or a mechanical transmission problem.
- With ignition off, disconnect electrical connector for solenoids from transmission. Road test vehicle and ensure transmission gear changes correspond with gearshift lever position. See GEAR APPLICATION table.
- If abnormality exists, a mechanical transmission problem exists. Turn ignition off. Reconnect electrical connector. Clear DTCs from ECM memory, as disconnecting electrical connector may set a DTC. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM.
GEAR APPLICATION
| Shift Lever Position | Gear |
|---|---|
| "D" | Overdrive |
| "2" | 3rd |
| "L" | 1st |
| "R" | Reverse |
| "P" | Park |